Ampeg Rocket Bass RB-210 2x10 500-watt Bass Combo Amp

  

Heritage'60s Looks and Hearty Ampeg Bass Tones - to Go! The 500-watt Rocket Bass RB-210 bass combo delivers classic good looks and timeless Ampeg tones to players on the move.

Fans of the 1960s Rocket series of Ampeg amplifiers will especially groove on the RB-210's black diamond wrap and signature sparkle grille cloth. Of course, bassists of all stripes will enjoy taking the renowned Ampeg punch and growl to go with this easy-traveling solution.

The Rocket Bass's Legacy preamp, 3-band EQ, Ultra Lo/Hi tone switches, and specially voiced ported Eminence speakers make it ridiculously easy to achieve monumental bass tones with any instrument in your arsenal. And thanks to a pair of 0dB and -15dB instrument inputs right on the front panel, the RB-210 has no trouble adjusting to hot-wound active humbuckers or passive vintage single-coils.

When you're ready to add some grit to rhythms and sustain to leads. Sweetwater is an Authorized Ampeg Dealer. Ampeg Rocket Bass RB-210 2x10 500-watt Bass Combo Amp. 500W 2 x 10" Bass Combo Amp with High-frequency Horn, 3-band EQ, 1/8" Aux Input, 1/8" Headphone Output, 0dB and -15dB 1/4" Inputs, XLR Balanced Output, and 1/4 External Speaker Output.

When you're ready to add some grit to rhythms and sustain to leads, the Rocket Bass's SGT (Super Grit Technology) controls dial in a smooth-to-gnarled overdrive that manages to keep fundamentals full while packing on the heat. You'll even find an 1/8-inch aux input and an 1/8-inch headphone output to facilitate silent practice, whether you're jamming along to tracks at home or warming up in the green room pre-show.

The Rocket Bass RB-210 is a well-rounded road performer and studio companion. Its 500 watts, twin 10-inch ported Eminence speakers, and defeatable high-frequency horn give you mammoth output and versatility onstage. The RB-210 also features a post-EQ/-volume/-loop XLR balanced output to capture the essence of your stage tone when going straight into a mixer or recording interface, as well as an external speaker output (8-ohm minimum) for times when you really need to move some air. A Legacy preamp and 3-band Ampeg tone stack give the Rocket Bass RB-210 bass combo the punch, power, and growl that Ampeg amps are known for. Specially voiced 10-inch Eminence speakers, paired with a defeatable high-frequency horn, succeed in delivering the goods for practice, tracking, and travel.

You also get Ultra Lo and Ultra Hi switches derived from Ampeg's SVT series of bass amps to help enhance your bass and treble registers. The Rocket Bass's SGT controls dial up the heat in a hurry. No matter what style of music you play, there are buckets of big-sounding tones waiting to be discovered in the Ampeg RB-210. Ampeg holds claim to some of the most recorded and toured-with bass amplifiers of all time.

The Rocket Bass RB-210 combo amp looks back to Rocket amplifiers of the 1960s for its Atomic Age visual cues while focusing forward to bring in-demand bass features to a lightweight design. Whether you're just starting out or you're a van-seasoned veteran, bass players at Sweetwater agree: there's loads to love about the Ampeg Rocket Bass RB-210 bass combo.

The RB-210 steps up from the RB-115 with a pair of custom 10-inch Eminence speakers and a defeatable high-frequency horn. Ampeg RB-210 Rocket Bass Combo Amplifier Features. Timeless Ampeg bass tone to go.

Takes visual cues from 1960s Rocket amplifiers. Ampeg Legend preamp with 3-band EQ delivers monumental bass tone for country to rock. SGT overdrive packs on bite and sustain. Specially voiced 10-inch Eminence speakers in a ported cabinet. Defeatable high-frequency horn increases presence and harmonics.

Balanced XLR output feeds a wet signal (post-EQ/-volume/-effects loop) into a soundboard or recording medium. SVT-derived Ultra Lo/Hi switches enhance your bass and treble registers. Effects loop gives you options for inserting pedal and rack effects.

External speaker output (8-ohm minimum, 250 watts at 8 ohms) lets you increase your stage output or switch up your cab sound. 0dB/-15dB instrument inputs accommodate active or passive pickups.

1/8-inch auxiliary input for jamming along to backing tracks. 1/8-inch headphone output for practice and recording. 500W (with external cab), 250W (internal only). 2 x 10, 1 x HF horn (defeatable). 2 x 1/4" (-15dB/dB), 1 x 1/8" (aux). 1 x 1/4 (external 8 ohm speaker), 1 x XLR (DI out). 1 x 1/4 TS (SGT). More than 30 years in business. Free tech support from audio experts.